Horizontal hold lever 3kN

CHF85.00

These “tie down” levers are available in the in the horizontal or vertical configuration and have an iron body. Depending on the chosen model of tie down lever, the m6 diameter thread allows you to exert up to 1, 2.5 or 3.7 kN of force axially to the piece on the CNC table.

Beschreibung

Horizontal hold lever 3kN

Lever ties horizontal, force vertical
These “tie down” levers are available in the in the horizontal or vertical configuration and have an iron body. Depending on the chosen model of tie down lever, the m6 diameter thread allows you to exert up to 1, 2.5 or 3.7 kN of force axially to the piece on the CNC table. The 26mm under arm height allows for a lot of room to work without compromising the position of your pieces. With its high 79 degree angle opening and its 5 mm mounting holes, this tie down can be adapted on your CNC table easily and is low enough (39mm) that it will not get in the way when the machine moves. See the options below for this particular model and its specifications.

 

*Conditions apply see our legal sections for details, images are representative only, prices, conditions, stock, availability subject to change at any time

Bewertungen

Es gibt noch keine Bewertungen.

Nur angemeldete Kunden, die dieses Produkt gekauft haben, dürfen eine Bewertung abgeben.


Avez-vous des questions à propos de ce produit ou sur un autre produit Badog ?

Si vous avez des questions , nous sommes à votre écoute
If you have any questions do not hesitate to ask!